NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancin..
Basic Information Modulation: Analog Torque: 4.8V: 69.4 oz-in (5.00 kg-cm) 6.0V: 83.3 oz-in (6.00 kg-cm) Speed: 4.8V: 0.18 sec/60° 6.0V: 0.15 sec/60° Weight: 1.76 oz (50.0 g) Dimensions: Le..
Cont Current: 25A Burst Current: 35A BEC Mode: Linear BEC : 5v / 2A Lipo Cells: 2-4 NiMH : 5-12 Weight: 22g Size: 24x45x11mm Supported motor speed for all TURNIGY ESCs is; (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles). ..
Programmable settings; Startup (Default Standard/Soft/hard) Low Voltage cutoff (Default 6.0/7.2/8.4/9.0/12.0/15.0/18.0V) Current limiting (Default Standard/Very sensitive/Insensitivity/Disabled) Brake (Default None/Soft/Hard) PWM rate (8/12/16 KHz) Timing (Default Auto/Low/Middle/High) Cutoff type (Default Hard/Soft) Governor mode (Default Auto/Low/High) Spec. Const..
Foxtech BE1806 KV2300 Brushless Motor is mini and delicated motor which adopts Kawasaki, Japan 1200 # 0.2mm high efficiency silicon steel and 40UH high temperature powerful magnet.The bearing imported from the Japanese NSK reduces the motor vibration to a large extent. Shell by high precision CNC machining makes the balance enhanced.The motor is compatible with most brushless ESC and perfec..
Made of the finest materials Extreme efficiency & power output Longest life Highest value The new Hyperion Zs motor series cost more than "budget" brands, but provide much more value in the short run - and over the years. Simply put, everything inside and out is the very best obtainable. Japanese 0.2mm stator steel and NMB bearings, 200C magnets an..
Specifications: Rotor Diameter: 38 mm Magnet Length: 25 mm Weight: 190g Output: 750kV Rated Power(W): 590 Rated Voltage (V): 14.8-18.5 Rated Current (A): 35-40 Maximum Current (10sec) (A): 75 No-Load Current (A): 2.0 Phase Resistance (Ohms): 31 Maximum Efficinecy: 85 Poles: 14 ..
Specifications: Dimension: 58mm x 49mm, 78mm(with shaft) Weight: 349g Kv: 1400rpm/V Turns: 8T Voltage: 5~8S Max Current: 110A Diameter of shaft: 6mm Length of front shaft: 21mm ESC: 150A ..
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final as..
Turnigy analog micro servo offering good torque, high speed, excellent centering and a great price! The strong gear train is all metal geared. Specs: Weight: 9g Size: 23.1mmx12.0mmx25.9mm Torque: 1.6kg.cm (4.8v)2 kg.cm (6.0v) Speed: 0.08 sec/60deg (4.8v)0.07 sec/deg (6.0v) Voltage: 4.8-6.0v Type: Analog Micro Gear Train: Metal Ball Bearing: No Lead Length: 2..
Showing 25 to 36 of 90 (8 Pages)