Brushless Motors

Brushless Motors

Sort By:
Show:
Display: List Grid
NTM PROP DRIVE  28-26 1000KV  235w
  Specs: Model: NTM Prop Drive Series 2826 1000kv Kv: 1000rpm/v Poles: 3 Motor Wind: 19T Max current: 15A Max Power: 176W @ 11.1V (3S) / 235W @ 15V (4S) Shaft: 3mm Weight: 54g ESC: 20~30A Cell count: 3s~4s Lipoly Bolt holes: 16mm & 19mm Bolt thread: M3 Connection: 3.5mm Bullet-connector Prop Test Data: 9x4.7 - 11.1V / 113W / 10.2A / 0.632kg thrust ..
Rp 392,000.00
EMAX BL2820/07  Brushless Motors
The Emax BL2820 brushless outrunner motor is designed for models up to 56.4 ounces. As a result of using the latest ferromagnetic materials the EMAX 2820 motor offers extremely high efficiency and load capability for their weight. EMAX motors offer a high quality of manufacturing, reliability, and performance to be some of the best outrunners available on the market.This motor comes with a cros..
Rp 430,000.00
MOTOR Solo Pro 180 Brushless Outrunner
..
Rp 250,000.00
DJI Multi-Rotor Replacement Brushless Motor
This is a replacement DJI Innovations Multi-Rotor Brushless Motor. This motor is compatible with all DJI Flame Wheel multi-rotor helicopters.  Specifications: Stator Size: 22x12mm kV: 920 rpm/V ..
Rp 350,000.00
Turnigy 3025-850kv 1300w Helicopter Motor
  Turnigy 3025-850kv 1300w Helicopter Motor   Specifications: RPM/v: 850kv Max RPM: 18800 No load current: 2.4A Max Current: 74amp Max Watts: 1300w Thrust: 1440gram Voltage: 22.2v (6s) Diameter of shaft: 5mm Weight: 182g ESC: 80A ..
Rp 460,000.00
NTM PROP DRIVE 2600KV 42W
  NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancin..
Rp 300,000.00
hexTronik 20gram Brushless Outrunner 2300kv
  Dimension: 23mm x 24mm, 34mm(with shaft) Weight: 20g  (kv2300) (not including connectors) Diameter of shaft: 2mm Length of front shaft: 9.8mm Max performance Voltage: 2S Max current: 5.3~8.5A/20S Prop: 6x3~7x3.5 Thrust: 300g Power: 72W For 200~300g model airplane (Indoor).   ..
Rp 180,000.00
Turnigy SK3 Fandrive - 3516-3300kv (70mm EDF)
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today. The result is an efficient, high caliber motor using quality double shielded bearings, ..
Rp 600,000.00
NTM PROP DRIVE 28-30A 750KV  140w
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancin..
Rp 392,000.00
  Turnigy A1405-3000KV Indoor Brushless Motor. Spec. Kv: 3000 rpm/v Voltage:3.7~7.41v (1~2s) No load Current: 0.4A Max Current: 6A Max Power: 30W Shaft Size: 3.9mm Shaft Length: 1.96mm Dimension: 14.24mm x 17.12mm Thrust: 80g Weight: 5g ..
Rp 255,000.00
HYPERION ZS3025-8 BRUSHLESS MOTOR
Made of the finest materials Extreme efficiency & power output Longest life Highest value The new Hyperion Zs motor series cost more than "budget" brands, but provide much more value in the short run - and over the years.  Simply put, everything inside and out is the very best obtainable.  Japanese 0.2mm stator steel and NMB bearings, 200C magnets an..
Rp 780,000.00
BRUSHLESS NTM 28-36 2700KV
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test. Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final as..
Rp 378,000.00