MULTI ROTOR PART

  MultiStar ESCs are a quality speed controller at a fantastic price! Designed for simple installation and easy setup these ESCs have proven to offer excellent performance when used in Multi-rotor applications. If you're starting out in Multi-rotors and need an easy to install solution that is tested and proven to work with Multi-rotor craft then these speed controllers have ..

The ND4 Filter for Phantom 3 Professional and Advanced helps to avoid overexposed photos.   Specifically designed for the DJI Phantom 3 Advanced and Professional Helps to reduce the amount of light coming into the sensor Gives you the freedom to create by allowing more control of the camera’s aperture, exposure time and sensor sensitivit..

  Specs: Model: NTM Prop Drive Series 2826 1000kv Kv: 1000rpm/v Poles: 3 Motor Wind: 19T Max current: 15A Max Power: 176W @ 11.1V (3S) / 235W @ 15V (4S) Shaft: 3mm Weight: 54g ESC: 20~30A Cell count: 3s~4s Lipoly Bolt holes: 16mm & 19mm Bolt thread: M3 Connection: 3.5mm Bullet-connector Prop Test Data: 9x4.7 - 11.1V / 113W / 10.2A / 0.632kg thrust ..

Input voltage: AC 100-240V; DC 11.0-18.0V Charge power: Max. 50W Discharge power: Max. 5W Charge current range: 0.1-7.0A Discharge current range : 0.1~2.0A LiIo/LiPo/LiFe cell count: 1~6 series NiCd/NiMH battery cell count: 1 - 15cells Pb battery voltage: 2V～20V  (1-10cells) Current drain for balancing LiPo: 300mah/cell Battery data memory: up to 10 data No. of ..

Walkera Part: 22.2V lipo battery 5400mAh 6S Features: on/off switch and battery level indicator Scout X4-Z-22 ..

The HDMI Output Module allows your Phantom 3 Professional or Advanced remote controller to output to an HDMI device, such as a screen or goggles.  This module allows for HDMI output from the Phantom 3 Professional or Advanced remote controller, similar to that of the HDMI output on the Inspire 1.   Live video feed, iOSD and the aircraft’s battery l..

If your looking for a high end, no compromise quadcopter frame with looks that could kill, the Talon is for you! The Turnigy Talon quadcopter frame is a high quality carbon fiber frame that offers both great looks and performance. Built from light weight yet extremely rigid carbon fiber and aluminum alloy, the Talon offers a great combination of weight savings and strength..

Features DJI Flame Wheel 1038 Propellers 10" These are the new 10x38 propellers for the DJI Flame Wheel, the 10" propellers have been specially designed to be used with the DJI 2212, 920kv Motors, they have a built in flat sides to match the DJI Flame Wheel motor shafts. The 10x38 10" propellers can be used on either the F450 Flame Wheel QuadCopter, or the F550 Flame Wheel HexaCopterfra..

Foxtech BE1806 KV2300 Brushless Motor is mini and delicated motor which adopts Kawasaki, Japan 1200 # 0.2mm high efficiency silicon steel and 40UH high temperature powerful magnet.The bearing imported from the Japanese NSK reduces the motor vibration to a large extent. Shell by high precision CNC machining makes the balance enhanced.The motor is compatible with most brushless ESC and perfec..

                                                        Use : Vehicles & Remote Control Toys   ..

USBasp AVR Programming Device for ATMEL proccessors Includes: 1 x USBasp Device 1 x 10-10-6 Cable Suits the Quadcopter Control Board. ..

This FPV A/V cable connects to your Turnigy HD ActionCam via the USB port and allows for live video output for FPV use. One end has the micro USB connector, the other has four bare wire leads for connecting to your FPV transmitter. All Turnigy HD ActionCam cameras are compatible with this cable and support the live A/V out function, as well as some SJ4000 cameras with firmware N201405270ZV..