Featured
New Product
Futaba 4FYG-R8004GF
The new 4YF 2.4GHz radio system makes Futaba quality FHSS (Frequency Hopping Spread Spectrum) tec..
Rp 1,615,000.00
LED CORN LIGTH 12V 1.8W
2 pcs ..
Rp 70,000.00
Best Sellers
Delta-8 FrSky 8ch 2.4GHz
8ch 2.4GHz FrSky D8/V8, Futaba FHSS/S-FHSS and Hitec A-FHSS Receiver with CPPM/RSSI Output Mode ..
Rp 450,000.00
COVERING FILM WHITE
1 meter ..
Rp 80,000.00
MOTOR FRAME SET V929 WLTOYS
SPEC Boom,Main Shaft,bearing,gear,Motor frame ..
Rp 65,000.00

SKYRC S60 BALANCE CHARGER

Product Code: SKYRCS60
Reward Points: 0
Availability:
In Stock
Price: Rp 650,000.00

Package includes :

SkyRC S60 Balance Charger/Discharger (1pc)

Wire Set (1 set)

Summary :

SkyRC S60 AC Professional Charger/Discharger stands out for its exquisite and stylish design. It can charge nearly all current battery types in the market, including new generation LiPo battery with end voltage 4.35V. What's more, users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. Besides that, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.

Spec :

Input Voltage AC100-240V

Charge Circuit Power Max. 60W

Discharge Circuit Power 10W

Charge Current Range 0.1-6A

Discharge Current Range 0.1-2A

Current Drian for Balancing Port Max 200mA/cell

Trickle Charging Current 50mA-300mA & OFF

LiPo/LiFe/Lilon/LiHV Battery Cell Count 2-4S

NiMH/NiCd Battery Cell Count 6-8S

Pb Battery Voltage 6-12V

Features :

Compact Design

AC 100-240v Input

Temperature Threshold

Built-in Cooling Fan

LiHV Mode Available

Different Charging Mode :

LiPo/LiFe/Lilon

Charge (Normal, Balance, Fast), Discharge, Storage

NiCd/NiMH

Charge (Normal, Auto), Discharge, Cycle, Re-Peak

PB Battery

Normal Charge, Discharge

Write a review

Your Name:
Your Review: Note: HTML is not translated! Rating: Bad            Good
Enter the code in the box below: